1.Introduction of Product
| Name | Plastic And Rubber Mixing Mill | Heating Way | Oil Or Steam |
| Type | Open Type | Feature | It is mainly used for plasticizing, calendaring and pressing |
| Roller | Peripheral Drilled Roll Or Hollow Roller, HS68~72 |
| Material | Steel Plate | Connect Way | cardan |
| capacity | 1800-2500 Kg/h | Certificate | CE |
2. Quick Detail:
- RED:One piece construction of welded steel plate or cast iron provides maximum stability.
- BUSHING: The bearing type bushing is constructed of cast iron housing and high strength bearing at inside diameter.
- BUSHING LUBRICATION: Employs automatic circulated lubrication system.
3. Description:
1. Technical parameter
- Speed radio of front/back rolls:1.22:1
- Rotary speed of front roll:42.65m/min
- Rotary speed of back roll:34.96m/min
- Motor power:132kw, 740rpm;
- Oil heating;
2. Main character
- Adjust equipment for space between 2 rollers, compulsory lubrication;
- Hard tooth gear box, low noise, long life, cardan shaft drive, with automatic writhe equipment;
- Emergency stop equipment;
4. Applications:
1. PVC Artificial Leather;
2. PVC film
3. PVC plastic floor
4. PVC plastic sheet
5. Plastic mixer
6. Rubber mixer
5. Specifications:
| TECHNICAL SPECIFICATIONS OF MIXING MILL | | | |
| Type | XK-400 | XK-450 | XK-560 | XK-610 | XK-660 | XK-760 |
| Roll Diameter(mm) | 405 | 450 | 560 | 610 | 660 | 760 |
| Working length(mm) | 1010 | 1200 | 1530 | 1680 | 1830 | 2130 |
| Front Roll Linear Velocity(m/min) | 24.93 | 27.51 | 36.24 | 42.5 | 41.98 | 52.02 |
| Two Rolls' Speed Ratio | 1:1.17 | 1:1.175 | 1:1.17 | 1:1.2 | 1:1.167 | 1:1.16 |
| Max.Roll Gap(mm) | 50 | 50 | 50 | 50 | 50 | 50 |
| Capacity(kg) | 25~35 | 30~50 | 50~60 | 90~120 | 140~160 | 190~220 |
| Power(kw) | 55 | 75 | 90 | 132 | 220~250 | 280~320 |
| Weight(t) | 10 | 12 | 20 | 25 | 30 | 40 |
| | | | | | | |
| Type | SK-400 | SK-450 | SK-560 | SK-610 | SK-660 | SK-760 |
| Roll Diameter(mm) | 405 | 450 | 560 | 610 | 660 | 760 |
| Working length(mm) | 1010 | 1200 | 1680 | 1830 | 2130 | 2800 |
| Front Roll Linear Velocity(m/min) | 24.93 | 27.51 | 36.24 | 42.5 | 41.98 | 52.02 |
| Two Rolls' Speed Ratio | 1:1.17 | 1:1.175 | 1:1.17 | 1:1.2 | 1:1.167 | 1:1.16 |
| Max.Roll Gap(mm) | 50 | 50 | 50 | 50 | 50 | 50 |
| Capacity(kg) | 18~25 | 25~35 | 35~50 | 90~120 | 140~160 | 190~220 |
| Power(kw) | 55 | 55 | 75 | 90 | 132 | 185 |
| Weight(t) | 10 | 12 | 20 | 25 | 30 | 40 |
6. Competitive Advantage:
1.Drilled roller is better cooling;
2.Motor power-zoom is more easy to modify the gap of two rollers
3.Speedy guide baffle is more easy to clean, and disassemble the guide baffle
4.Bearing bushing is fitted with a special bearing for great precision accuracy, smooth running performance and maximum durability.
5.With the use of double extension shafts and universal coupling for transmission, the operation performance becomes more stable and the space between the two rollers can be regulated to the most extent gap.
6.Emergency Stop device can effectively decrease mechanical injury and protect the safety of
operator.
7.Service:
1. Oversea installation guide.
2. Oversea test running
3. Ovsersea worker training
4. Technical support
5. Spare parts supply
6. Technical operation support
7. Formula and processing support
8. Option
Mixing mill working principle of the equipment is the main working part two speed ranging from relative rotation of the hollow roller. When added to the two rubber roller in the roller extrusion after above at the same time under the action of friction and adhesion force, form the end of the wedge strip, Under the action of roller by the strong crush, cut and tear strip, accompanied by chemical action, So repeatedly, finally complete the new practice, thermal refining and mixing and tablet.
9. Commercial Terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyer’s factory:
(1) The mechanical Parts: 12 months
(2) The electrical Parts: 6 months
5. Installations and Commissioning
(1) Up to date commissioning has been made before shipment
(2) Overseas Commissioning and charges one or two technicians will be sent to the buyer to guide the
installation and commissioning of the equipment if the customer requests.
Customers pay the charge of our technicians.
(1) Round-trip Airplane Ticket
(2) Charges of transportation, accommodation and communication
(3) The allowance for the technicians is USD 80 per day for one person.
(4) An interpreter is needed.
6. Spare parts:
Spare parts for one year are needed for the customers, and we suggest that customers should buy the spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing, and footing drawings are provided.
Product Tags:
|
|
132kw Plastic And Rubber Thin oil lubrication of the bearing Open Mill Cardan drive Images
|
